Marshall Batteries
0800 BATTERY
0800 228 837
Holler for a Marshall

Battery Maintenance

• Visually inspect battery terminals, clean or replace as necessary.
• Check hold down clamp and replace if necessary. (Battery must be secured to avoid un-necessary vibration).
• Remove battery vent caps if fitted and check battery fluid level which should be 12mm above plates. Top up using deionised water.
• Check vehicle for current drain using Electronic Tester.
• Check vehicle charging system. For 12 volt vehicles, reading should be between 13.8 volts and14.6 volts.
• As a final check, check terminals, earth lead, and hold down clamp for tightness. Vehicle electrical and charging systems are becoming more complex and we recommend fitting by professional installers only. For more Help and advice (visit your nearest Exide store