Accessories

Automotive TEsTERS and chargers

Battery 

Charger

High power 3 stage charger suitable for batteries up to 950 CCA and 300Ah. Fast and efficient charging car, truck, 4wd, tractor, deep cycle and high capacity batteries.

This 3 step switch mode offers precise and safe charging without fluctuation for all types of batteries, including SLA, GEL, Cal/Cal and Deep Cycle.

Compact, lightweight this charger delivers a fully charged and maintained battery as well as extended battery life in less charging time.

• 3 stage automatic
• Output short circuit and reverse polarity protector

• Switch mode technologyElectrical System Protector
A very professional tool which allows batteries to be charged without the loss of vehicle memory in the radio (codes and station presets) and engine management system.

Battery, cables and adaptors are all carried within a strong trade bag which incorporates: carry strap, positive terminal sleeve, cigarette socket adaptor and a 240 volt charger
• Can be charged from vehicle 12V socket
• Anti-spike surge protection
• Short Circuit and reverse polarity protection
• State of Charge indicator

Battery Testers

Our testers offer the very best in professional battery testing and are capable of testing 6 and 12 volt batteries from 40 to 2000 CCA capacity. A tester with a built in thermal printer is also available.

GNB Industrial (Division of Exide Technologies) has a long & illustrious background of providing Chargers/DC Systems for industrial applications.  The options of switched-mode & thyristor technologies are both available through us.  Their applications are as listed below:

• Turbine Pump
• Protection relays
• Switch Tripping
• Emergency lighting
• Tele-communication
• Process control
• Microwave Links
• Traction Substation
• Cathodic Protection Systems etc.

Our product range encompasses following voltages: 220V, 125V, 110V, 48V, 32V, 24V & 12V. Exide CBC/4 thyristor range has been widely acknowledged as a reliable source of DC power for more than 25 yrs in the region. Three phase & single phase systems from the CBC/4 range have been upgraded to include microprocessor based control. More-over these systems have serial port connectivity for remote monitoring of alarms & systems.

Industrial switched-mode systems branded as ‘EXEL POWER’ uses the modularity of switched mode Rectifiers, DC to AC inverters & DC to DC converters. They are integrated in 27 RU, 33 RU & 45 RU - 19” & 23” inches - rack mountable cabinets to produce power systems with high power density in a small foot-print. EXEL POWER has an optional inclusion of BATTERY CELL MONITORING covering all the above listed voltages.

In general Exide’s DC range can be used with either lead acid or nickel cadmium batteries. Our customisation capabilities cover both parallel & unitary chargers for industry specific segments. Inverter modules used with DC power are inclusive of static transfer & manual by-pass switches. DC Motor Starters with distribution centres & tie-in switches have also been produced in one single cabinet (EXEL POWER range) in the past. Higher ingress protection ratings like IP 43, IP 54 IP 56 etc. are also available for specific indoor & outdoor applications.

Our battery knowledge & a large network of offices provide a unique source of service & performance reliability on systems delivered to our customers.

Please contact  Industrial Chargers for further information..

Static AC UPS Systems

Our offerings cover IGBT, PWM premium solid state industrial inverters & UPS equipment. These equipments rank high in reliability & performance with redundancy in power supplies & processor control for each of the UPS subsystems. KVA ratings are available in following voltages:

• 10 to 120 KVA in three phase input & single phase output (with input & output isolation transformers)
• 10 to 120 KVA in three phase input & single phase output ( with output  isolation transformer)
• 10 to 120 KVA in three phase input & three phase output (with output isolation transformer)
• 160 KVA to 1000 KVA three phase input & three phase output (with output isolation transformer).

All the above UPS systems are classified as VFI 111 according to IEC/EN 62040-3 using matured Digital Signal Processing Systems (DSP). The matured DSP enhances parallel synchronisation between UPS’s using FMMT hence avoiding the traditional master-slave configuration. UPS’s with such a technology have good short circuit behaviour & overload response pattern. THDv & THDi are dependent on the pulse rating of the rectifiers deployed & they are generally less than 2% & 5% respectively (assuming normal mains distortion level is prevalent at the input).

Other accessories offered are as listed below:

• Dual Mains feed to accommodate for a separate feed to the UPS internal by-pass
• Isolation Transformer on the by-pass line
• Surge Filters or Line conditioners
• Voltage Stabilisers
• External manual by-pass switches with key interlocking or solenoid connection
• Explosion proof battery boxes
• Higher charging current to accommodate for longer battery autonomy
• Higher IP rating – up to 43
• Redundancy in fans with monitoring
• J Bus, Modbus, SNMP & Profibus adapters
• External Static Transfer Switches

All engineering, design & services support for the above systems are available through our call centres & service engineers on a consistent basis.

Our DC & AC references cover some of the major customers from the following sectors:

• Oil & Gas
• Chemical Processing
• Mining
• Power Generation
• Power Transmission
• Railways
• Desalination Plants
• Water Treatment Plants
• Steel Plants
• Wind Farms

Please contact Industrial Chargers for further infomation.